ES1 - Silver
ES2 - Gold
ES3 - Light Gold
ES3-1 - Rose Gold
ES4 - Copper
ES4-1 - Light Copper
ES6 - Brown
ES6-1 - Light Brown
ES7 - Metal
ES7-1 - Gun Metal
ES8 - Navy
ES8-1 - Blue
ES9 - Green
ES10 - Red
ES11 - Pink
ES11-1 - Light Pink
ES - Clear
ES - White
ES5 - Bronze
ES - Black
TECHNICAL DATA SHEET
MILESTONE Textile Hot Stamping Foils
MILESTONE offers innovative hot stamping foil solutions to turn textile designers' dreams of lasting metallic shine and eye-catching reflections into reality. Our product portfolio features two high-performance options:
ES Series
- Korean-origin, 16-micron premium stamping foil.
- Ideal for piece-to-piece printing with water-based adhesive (especially T-shirt prints).
- Provides superior wash fastness, withstanding 15+ home laundry cycles.
- Delivers permanent metallic effects and professional results with high quality.
Xline Series
- Chinese-origin, 12-micron cost-effective stamping foil.
- Optimized for roll-to-roll (continuous) printing with solvent-based adhesive.
- Preferred for high-volume production due to its economical price.
- Offers easy application and consistent performance in continuous printing processes.
These two products provide flexibility for different budgets and applications: ES
Series for premium quality and wash durability, Xline Series for cost advantage and
high-volume production.
With MILESTONE’s long-standing industry expertise, both series deliver lasting
metallic shine and reliable performance.
For detailed information, please contact us.
Application Instructions
1. ES Series – Application Conditions
Water-based adhesive for piece-to-piece printing – T-shirts
- Temperature: 160~170℃
- Time: 10-20 seconds
- Apply adhesive to the fabric and cure in the dryer (follow chemical supplier instructions).
- Lay the foil evenly onto the fabric and press at the specified settings.
- Monitor temperature and pressure during continuous operation.
- Allow the fabric to cool completely before peeling off the PET film.
2. Xline Series – Application Conditions
Solvent-based adhesive for roll-to-roll / continuous printing
- Temperature: 120~140℃
- Speed: Adjustable according to your process (typically 15-25 m/min)
- Control tension on film winder and rewinder, ensuring adequate tension.
- Apply solvent-based adhesive to the foil, pass through the drying cabinet to partially cure the adhesive, then press onto the fabric.
- Monitor temperature and pressure during high-speed continuous operation.
- Allow the fabric to fully cure in a ripening room heated to 70°C (approximately 24 hours), then peel off the PET film.
